Burst Pipe Water Damage in Frisco, TX

Short answer: For a burst pipe in Frisco, close the main water shut-off (usually in the garage in newer homes), turn off power to wet areas only if you can reach the panel without standing in water, and photograph the damage. You usually need both a plumber to fix the pipe and a restoration company to extract water and dry the house.

A burst pipe can pour out a lot of water fast. Close the main shut-off, then email hello@friscowaterdamagehelp.com for extraction and drying from an independent local restoration company.

Email us How this works

Frisco Water Damage Help is an independent referral service, not a water damage restoration company. Your request is passed to an independent local water damage restoration company. Disclosure

Phone line coming soon. Email us now.

Updated · Written by the Frisco Water Damage Help editorial team (a referral service, not a licensed restoration company) · Fact-checked against the public sources linked on this page · How we research guides

In North Texas a burst pipe is usually one of two things: a freeze break during a rare hard cold snap, or a fitting, supply line or pipe failing on an ordinary day. Either way the first move is the same.

What should you do right now?

  1. Close the main water shut-off. The City of Frisco says the homeowner shut-off is typically in the garage in newer homes and in a flowerbed in older homes; turn it clockwise. If you don't know how to shut off your water, call Frisco Public Works at 972-292-5800, staffed 24/7 (if busy, the city's non-emergency dispatch line is 972-292-6010).
  2. Turn off power to wet areas at the breaker if you can reach the panel without standing in water.
  3. Open a faucet at the lowest point of the house to drain the lines once the main is off.
  4. Photograph and video the damage, then start moving belongings out of the water.
  5. Email hello@friscowaterdamagehelp.com for extraction and drying, and call a plumber for the pipe.

What did Winter Storm Uri teach Frisco?

In February 2021, Winter Storm Uri kept North Texas below freezing for days and knocked out power across the state. When temperatures rose, homeowners across the region found what the ice had been hiding. KERA reported Frisco residents discovering cracked fittings and shattered pipes, and plumbers statewide were booked for weeks. Restoration companies faced the same backlog, and many homes sat wet while owners waited.

Lessons worth keeping:

Why do pipes burst on an ordinary day?

Frisco's housing is young. The median home was built in 2009, so classic corroded galvanized pipe is uncommon. Everyday failures in newer homes tend to be:

In older parts of nearby Plano and The Colony, polybutylene supply pipe from the 1980s and early 1990s is another known failure point; see the Plano page.

How is a house dried after a burst pipe?

Water from a supply pipe starts as clean (Category 1) water, which gives you the best chance to dry materials in place rather than tear them out, but only if work starts quickly. After a day or two, or once it soaks through flooring and building materials, it can degrade. Expect extraction, removal of wet carpet pad and swollen cabinet bases, air movers and dehumidifiers, and daily moisture readings. If the break was in an upstairs wall or attic, ceilings below may need to be opened; see ceiling water damage. The full process is on water removal and drying.

Does insurance cover a burst pipe?

Texas homeowners policies typically cover sudden and accidental water damage from a burst pipe. Report the claim promptly, document before cleanup, keep the plumber's note that names the cause, and keep receipts for emergency work. Insurers expect reasonable steps to prevent further damage, so starting drying right away helps your claim rather than hurting it. Our 24-hour checklist has the step-by-step version.

How do you prevent the next one?

Water on the floor, in the ceiling or the walls?

Email hello@friscowaterdamagehelp.com

Phone line coming soon. Email us now. Write to hello@friscowaterdamagehelp.com with your ZIP code and what is wrong. Your request is passed to an independent local water damage restoration company. Ask for the company name, its IICRC certification and a written scope before work starts.

Sources

Questions people ask

Do I need a plumber or a water damage company for a burst pipe?

Usually both. A plumber repairs the pipe; a restoration company extracts water and dries the structure. They're separate trades. Some restoration companies coordinate a plumber for you. Stop the water first, then call whichever you can reach first. Drying shouldn't wait for the plumbing repair if the water is already off.

Does insurance cover a frozen pipe that burst?

Texas homeowners policies typically cover sudden water damage from a burst pipe. Policies can limit coverage if a home was left vacant or unheated without reasonable steps to prevent freezing, and the cost to fix the pipe itself may be treated differently from the water damage it caused. Read your policy and report the claim quickly.

What temperature do pipes freeze in North Texas?

There's no single number, but risk climbs when temperatures stay in the low 20s or below for several hours, especially with wind. Pipes in attics, exterior walls, garages and outdoor hose bibs freeze first. North Texas homes are built for heat, so a hard freeze catches more pipes than it would up north.

A pipe froze but hasn't leaked. What should I do?

Open the faucet it feeds, then warm the pipe gently with a hair dryer or space heater kept at a safe distance. Never use an open flame. Have the main shut-off ready: a frozen pipe may already be cracked and start leaking as it thaws.

Phone line coming soon · Email us