Water Damage Restoration Cost in Frisco, TX

Short answer: A typical Dallas-area water damage restoration job costs about $1,791 to $7,922, averaging $4,788 (Angi, 2026). The total depends on the water category (clean, gray or black), the size of the wet area, the materials, any mold, and how fast drying starts. Every figure here is a published typical range, not a quote. Ask for an itemized estimate.

Published 2026 data puts a typical Dallas-area water damage job at about $1,800 to $7,900. Here's what drives your number. For a real estimate, email hello@friscowaterdamagehelp.com.

Email us How this works

Frisco Water Damage Help is an independent referral service, not a water damage restoration company. Your request is passed to an independent local water damage restoration company. Disclosure

Phone line coming soon. Email us now.

Updated · Written by the Frisco Water Damage Help editorial team (a referral service, not a licensed restoration company) · Fact-checked against the public sources linked on this page · How we research guides

Water damage pricing is driven by scope more than by the company. Here are the published ranges, what moves a Frisco job up or down, and how insurance fits in. These are typical ranges from national cost guides, not quotes.

How much does water damage restoration cost in total?

Published water damage restoration cost ranges (2026)
Source and scopeTypical rangeAverage
Angi, Dallas, TX$1,791–$7,922$4,788
Angi, national$1,385–$6,381 (full range $450–$16,000)$3,874
HomeGuide, national$2,000–$6,000 average jobn/a

Angi's Dallas average sits about 24% above its national average. Frisco is part of the same Dallas–Fort Worth labor market.

What does it cost per square foot, by water category?

Water extraction and mitigation, per square foot
Water categoryHomeGuide (extraction)Angi (average)
Category 1, clean (supply line, burst pipe)$4–$6$3.50
Category 2, gray (washer, dishwasher, toilet without solids)$6–$9$5.25
Category 3, black (sewage, outside floodwater)$9–$12$7.50

See water removal and drying for how categories are assigned, and sewage cleanup for why Category 3 costs more.

What add-ons and related work cost extra?

Common add-on costs (national cost guides)
ItemTypical costSource
Ceiling repair after water damage$450–$1,600Angi
Mold removal added to a water job$1,200–$3,800Angi
Mold remediation$15–$30 per sq ftHomeGuide
Mold inspection$300–$650HomeGuide

Plumbing repairs, such as the burst pipe, slab leak or water heater, are billed separately by a plumber. Rebuild costs, including drywall, paint, flooring and cabinets, depend heavily on your finishes; matching the hardwood or tile in a newer Frisco home is often the biggest line on the final bill.

What drives a Frisco job up or down?

How does insurance change what you pay?

If the loss is covered, typically sudden and accidental water damage, you pay your deductible and the insurer pays the rest of the covered scope. The Texas Department of Insurance explains that with replacement cost coverage you might get two payments: the estimated repair cost minus depreciation first, and the rest after repairs are done. If you have a mortgage, the check usually goes to your mortgage company, which must contact you within 10 days. TDI's claim steps also say you choose the contractor. Two rules to remember:

Details are in our Texas insurance claim guide.

How do you get a fair estimate?

Water on the floor, in the ceiling or the walls?

Email hello@friscowaterdamagehelp.com

Phone line coming soon. Email us now. Write to hello@friscowaterdamagehelp.com with your ZIP code and what is wrong. Your request is passed to an independent local water damage restoration company. Ask for the company name, its IICRC certification and a written scope before work starts.

Sources

Questions people ask

Why do water damage estimates vary so much?

Because the scope varies. The same burst pipe caught in one hour versus one day can mean drying in place versus removing drywall, flooring and cabinets. Water category (clean, gray, black), the size of the wet area, materials such as hardwood or tile, mold, and who does the rebuild all change the total.

Do restoration companies charge by the hour or by the job?

Most price mitigation work by line item, using estimating software common in the insurance industry: per square foot of extraction, per day for each dehumidifier and air mover, per item of removed material. Ask for an itemized estimate and daily equipment logs so you and your adjuster can check the invoice.

Will insurance pay the restoration company directly?

Sometimes. Insurers often issue checks naming you, and often your mortgage company too. Some homeowners sign a direction to pay so the insurer pays the contractor directly. Read anything you sign carefully, and never sign over more rights than you intend.

Is a cheaper bid always worse?

Not always, but compare scopes, not just totals. A low bid may leave out moisture monitoring, antimicrobial treatment, contents handling or the rebuild. And be suspicious of any offer to cover or absorb your deductible. In Texas that's illegal.

Phone line coming soon · Email us